PART 3 - Technical manual
28
2.
3.
4.
Connection of power cables
The last step is to connect the control unit power cable to an
easily accessible 230V mains plug. The green diode on the
control unit illuminates when the power is turned on.
Keep all cables away from the floor and the moving parts
of the bed. Loose / excessive cable can be attached to the
bedframe with cable ties next to the control unit.
Risk of personal injury or product damage.
Incorrect handling of cables can cause electric
shock or product failure.
•
Do not bend / break or cut the power cord or otherwise
damage it.
•
Do not run over the power cord with the bed.
•
Do not insert the power cord into moving parts.
•
Unplug the power supply cord before moving the bed.
•
Ensure that no cables (power cord or cables from other
equipment) are jammed or otherwise damaged when
the bed is in use.
•
Keep bed components and accessories at least 30 cm
away from heated surfaces and direct sunlight.
Attaching the sheets
Please refer to page 17-19 for instructions on how to attach
the sheets
.
QUICK GUIDE LOCATION
The quick guide should always be placed where it will be
visible from the bed and in close proximity to the bed.
3. The plugs on the blue bar motor cables are fitted with a
blue O ring. Connect the cables from the blue bar to the
control unit in the socket shown above (marked with a
blue color code).
4. Close the control unit.
2. The plugs on the red bar motor cables are fitted with a
red O ring. Connect the cables from the red bar to the
control unit in the socket shown above (marked with a
red color code).
Connecting the control unit
The hand control should be connected before the power
cable is connected to a main plug.
1.
1. Connect the hand control to the control unit in the
socket shown above.
