VendCo KARISMA, Installation - Use - Maintenance, Page: 68 / 72

© by N&W GLOBAL VENDING S.p.A. 02-2014 4535 00
ENTEriNg ThE ProgrammiNg modE
to access the menu for programming the machine press
the touch screen area with the "Please select the drink"
message for 3 seconds.
daTE TimE
sElEcT a driNK
alternatively, the programming menu can be accessed
by opening the door.
It is proposed the selection screen that allow you to ac-
cess the menus: Washes, UsB, Manager, technical.
to access the Manager and technical menus, a pass-
word is required.
to access the "Washes" and "UsB" menus, no password
is necessary.
touching the "eXIt" button, the machine returns to
normal use.
NavigaTioN modE
scroll the menu using the scroll bar, locate and touch the
function to operate on.
the menus are represented as follows:
first lEvEl mENu
 

�
∏
TEchNiciaN
1. sElEcTioNs
2. disPlay
3. sETTiNgs
4. calibraTioN
5. diagNosTics
6. couNTErs
-the first row shows the menu in which we are operating
(Manager, Technical, Washes, USB)
-on bottom left the eXIt button brings back to the menu
selection screen
-In the middle are the first level menu entries with the
reference number of the function
lowEr lEvEl mENu
 

3
�
∏
TEchNiciaN
1. sElEcTioNs
2. disPlay
3. sETTiNgs
4. calibraTioN
5. diagNosTics
6. couNTErs
the first row shows the upper level function in which we
are operating
-on the left eXIt button (brings back to menu selection
screen) and the button with the reference number of
the upper level function (press to go back one level)
-In the middle are the lower level menu entries with the
reference number of the function
i
NsErtiNg tHE valuEs
When the machine software requires you to enter al-
phanumeric values, data and on/oFF parameters it is
possible to use one of the following methods:
-keypad appearing on the screen
-from the list of proposed values
-"+" and "-" keys
-on / oFF button
the screens allow to:
Button to confirm the values entered.
In the text shown as
�
Button to cancel the values entered.
In the text shown as
�
�
∏
Button for exiting the programming menu
and return to normal use