VendCo KARISMA, Installation - Use - Maintenance, Page: 22 / 72

© by N&W GLOBAL VENDING S.p.A.
16
02-2014 4535 00
chapter 2
iNsTallaTioN
the installation and the subsequent maintenance
operations shall be carried out with the machine con-
nected to the power supply and therefore by specialised
personnel, trained for the use of the machine who has
been informed of the specific risks deriving from such a
situation.
the machine is not suitable for outside installations, it
needs to be installed inside dry premises, with tempera-
ture between 2° and 32°c.
the machine cannot be installed in environments in
which jets of water are used for cleaning.
When the machine is installed, the hydraulic cir -
cuits and the parts in contact with the food prod-
ucts need to be sterilised in order to eliminate any
bacteria which could have formed during storage.
maiN swiTch aNd safETiEs
m
aiN switcH
the switch is positioned behind the solid residue con-
tainer.
to access the main switch, you'll need to remove the
solid and liquid residue trays.
the support terminal block of the line cable, line fuse,
and noise filter are always powered.
2
1
Fig. 15
1- Main switch
2- Line fuse
safEtiEs
the unit has magnetic sensors that allow the detection
of:
-the closing of the door
-the presence of the containers
-the presence of ground trays
In the absence of one of the conditions listed above, the
device is disabled.
With the door open, there is no access to live-parts.
Inside the machine, only those parts which are
protected by covers and which are highlighted with
a label "disconnect voltage before removing the
cover" remain live.
Before removing these covers, it's necessary to
unplug the machine from the power supply.
this machine is provided with a magnet that allows the
operation with the door open.
the magnet must not be left inside the machine, but it
must be kept by personnel trained in its use.
the closing of the door of the machine is possible only
after removing the magnet.
uNPacKiNg ThE machiNE
after removing the packaging, verify the integrity of the
machine.
In case of doubt, do not use the machine.
The packaging materials (plastic bags, expanded
polystyrene, nails, etc.) shall be kept out of the
reach of children as they are a potential source of
danger.
the packaging materials need to be disposed of in
authorised places. Recycling materials shall be given to
specialised recycling companies
important
the machine must be positioned on a leveled surface,
so that the maximum inclination does not exceed 2°.
If needed, level it out using the appropriate adjustable
feet provided with the machine.