Vemer Dafne Wi-Fi, User Manual

Page: 19 / 56

English
- 17 -
Dafne Wi-Fi Chronothermostat User Manual
Installing the device.
• Install the device at a height of about 1.5 m from the fl oor, in an area that refl ects
as much as possible the average temperature conditions of the room.
Avoid installation near doors or windows, in niches, behind doors and curtains
or in places with excess or total lack of ventilation.
• Mount the white or anthracite gray frame according to your preferences by hooking
it to the special teeth on the device (with the BTicino Living Now series, do not
mount any frame and follow the instructions in the mounting KIT, which can be
purchased as an accessory).
• Make the connections in compliance with the diagrams shown in this manual.
• Fix the device inside the 3 modules box in compliance with the assembly diagrams
described at the beginning of this manual. The accessories for the installation
included in the package allow the mounting of the plates described in the diagram
“adjustable plates” and they are:
- mount A
- mount B (according to the needs it could be necessary to remove the side cogs)
- mount AIR
- couple of BM side plastic elements (both of white colour and grey colour)
- couple of VI side plastic elements (both of white colour and grey colour)
- covers of white colour and anthracite grey colour.
• Power up the device which, upon fi rst start-up (or after a default reset)
will turn on all segments of the LCD display for about 3 seconds and the relay
will perform the OFF-ON-OFF sequence, after which the screen will appear:
• Proceed with the device confi guration described below.