Vemer Dafne Wi-Fi, User Manual

Page: 34 / 56

English
- 32 -
Dafne Wi-Fi Chronothermostat User Manual
2. Press briefl y the key until the symbol
fl ashes and press the key to access
the parameters modifi cation.
3. The value of the timing currently set fl ashes
(00 = no timing). Enter the time delay value
(from 15 minutes to 99 days) with the
and keys and press the key to
confi rm.
4. Once parameters are set , to exit and go
back to the programming menu, press for a
short time the key
.
To exit and go back to the normal operation
(automatic, manual) press for a long
time the key
or wait for the time-out
expiration (30 seconds about).
If a timing is active, the display shows the
symbol
.
To interrupt a timing, access again the menu
and set the value
.
Timing setting
This menu allows the setting of a timing on the current operating mode, expressed in
hours or days.
For further information about timings, see the chapter “Timings: what they
are” on page 46.
To set a timing:
1. From the normal operation display, press for a long time the key until the
symbol starts fl ashing on fi eld (2)