Vemer Dafne Wi-Fi, User Manual

Page: 21 / 56

English
- 19 -
Dafne Wi-Fi Chronothermostat User Manual
Configuring the remote control device (for Android)
To configure the device after the first power on or after a factory reset using an iPhone,
proceed as follows:
1. While the screen shown on page 17 is displayed, press the or to choose
1HW21 and the to confirm (failure to choose within 30 seconds is equivalent
to choosing
1HW21
).
2. Make sure the device displays “
&RQIQ(W
”. If this is not the case, hold down
the and keys simultaneously until the display shows &RQIQ(W
the icon and starts flashing (wait for it to become steady before proceeding
with the next point).
3. Start the app, choose “Add. Thermostat ”and select the Dafne model among
those available. The procedure guides the user through the configuration
of the Dafne Wi-Fi.
4. Select the “ iwm... ” network generated by the device by accessing the iPhone’s
Wi-Fi settings. Wait for the Wi-Fi icon to appear on the iPhone (or iPad) display
and tap “Next”. Wait for the device display to show the icon to indicate the
successful connection between the app and the device.
5. Enter the full name of the home Wi-Fi network to which to connect the device
and the password and click “Next”*
* Important: before proceeding make sure that the icon on the device display
is still on. Otherwise, access the Wi-Fi settings of the smartphone to manually
reconnect to the “iwm ...”
6. Enter a name that identifies the Dafne Wi-Fi and choose an icon to help identify
the device from those proposed. Confirm with “Save”.
The configuration procedure is finished. At this point:
the app
visualizza displays the list of devices associated with your account
among which also the newly associated device must appear.
Dafne Wi-Fi
displays the main screen.
Check that the icon and that the time shown at the top left is correct.