VEMAG HP10E, Operating Instructions Manual

Page: 114 / 167

HP10E / HP12E / HP15E / HP20E - Dairy design 6. Graphical control
6-76 © VEMAG 2013
Number Message Cause Remedy
20225 Gripper swivel drive refe-
rencing failed
Drive could not be referenced in
the specified time
-
20226 Casing applier drive refe-
rencing failed
Drive could not be referenced in
the specified time
-
20227 Stop due to the detection
of metal — casing left in
the casing brake
Metal detector has detected metal -
20228 Drive unit was folded
down — casing left in the
casing brake
Drive unit was folded down during
production
-
20229 Filling horn not in filling
position
Filling horns must be swivelled into
the filling position
-
20230 Conveyor 1 adjustable
drive referencing failed
20231 Conveyor 2 adjustable
drive referencing failed
20232 Blade drive referencing
failed
20233 Check dividing belts
sensor
21000
-22999
Linking drive Drive #1 -
23000
-24999
Belt drive (LPG)
Belt drive 1 (FSL)
Drive #2 -
25000 -
26999
Linking head drive (LPG)
Belt drive 2 (FSL)
Drive #3 -
27000 -
28999
Casing pusher drive (LPG)
Blade drive (FSL)
Drive #4 -
29000 -
30999
Magazine feed drive
(LPG)
Belt 1 adjustable drive
(FSL)
Drive #5 -
31000 -
32999
Gripper swivel drive (LPG)
Belt 2 adjustable drive
(FSL)
Drive #6 -
33000 -
34999
Casing applier drive (LPG) Drive #7 -
5000 Attachment 2 ready Attachment 2 is ready (e.g. hang-
ing machine).
-
50001 Guide rail open Guide rail at the loading position
is open.
Close the guide rail after loading.
50100 Hanging machine drive
50200 More hooks detected than
set.
Loading does not match setting Check loading and setting.
50201 Fewer hooks detected
than set.
Loading does not match setting Check loading and setting.
50202 Hook accuracy