manualshive.com logo in svg

VEMAG 168.1004, Operating Instructions Manual, Page: 49 / 167

Share
Download
VEMAG 168.1004 Operating Instructions Manual Download Page 49

HP10E / HP12E / HP15E / HP20E - Dairy design

6. Graphical control

6-11

© VEMAG 2013

6.5.1 Select and edit programs

In the 

Program

 field you can select, edit, copy and delete filling 

programs and also enter product names for the individual programs. 

Program numbers 0 to 99 are available.
•  Press the 

Program 

function key.

•  Enter the program number using the 

numerical keypad

.

•  Press 

Enter.

•  Select the field for product name using the bottom 

cursor key

.

•  Press 

Enter.

 A list of the existing programs appears. Below the list 

are six keys for selecting the desired action: New/Delete/Copy/Edit/

Select/Cancel.

•  Select the action using the 

left/right cursor keys

.

•  Press 

Enter.

A keyboard is shown for you to enter the product name.
•  Enter product name. Letters and numbers are marked using the 

four 

cursor keys 

and adopted by pressing 

Enter

.

•  Press 

Enter

 on the keypad. The keyboard is hidden again and the 

product name is adopted.

Summary of Contents for 168.1004








































































































































































Reviews:

No comments