6
4. Maintenance
No routine or extraordinary maintenance is necessary apart from periodically cleaning the unit as described in this manual.
In compliance with the product guarantee law, repairs to our units must be carried out in our factory, unless previously
agreed otherwise with local distributors.
The instrument must be transported in its original packaging and any indications present on the original packaging must be
followed (e.g. palletized).
It is the responsibility of the user, to properly decontaminate the unit in case of hazardous substances remaining on the
surface or interior of the device. If in doubt about the compatibility of a cleaning or decontamination product, contact the
manufacturer or distributor.
4.1 Cleaning
Disconnect the unit from the power supply and use a cloth dampened with an non-inflammable non-aggressive detergent.
5. Technical data
Power supply
230 V / 50-60 Hz or 115 V / 60 Hz
Dimensions WxHxD
203x93.5x344 mm (8x3.68x13.5 in)
Weight
3.5 Kg (7.7 lbs)
Power input
800 W
Heat output
770 W
Motor rating output
10 W
Dimension of the heating plate
180 x 180 mm
Programmable temperature range
5
– 400 °C
Type of temperature control
Analogic
Overtemperature protection
Yes
Stirring capacity
15 liters of H
2
O
Programmable speed range
50
– 1300 rpm
Type of motor control
Electronic
Noise level
<< 80 dBa
Temperature range
+5…+40 °C
Storage temperature range
-
10…+60 °C
Max humidity
80%
Level of electrical protection CEI EN60529
IP 42
Overvoltage category
II
Pollution degree CEI EN61010-1
2
Max altitude
4000 m
6. Accessories / Spare parts
A00001056
Magnetic stir bar Ø. 6x35mm
A00001060
Magnetic stir bar Ø 10x40mm
A00001061
Magnetic stir bar Ø 9.5x60mm
A00001071
Hemispheric bowl for 250ml flasks
A00001072
Hemispheric bowl for 500ml flasks
A00001073
Hemispheric bowl for 1000ml flasks
A00001069
Support rod
10002097
Knob
10000239
Foot
A00001056
A00001060
A00001061
A00001071
A00001072
A00001073
A00001069
