VWS2E
- 2 -
VELLEMAN
o
POS (Point of Sale) and live promotion
o
medical emergency sites and hospitals
o
banks
o
traffic control management
o
nursery and retirement homes
o
parking lots
o
production facilities such as factories
•
software and manual included on CD
•
good knowledge of network and internet applications required
4. Technical Specifications
•
channels: 2 channels for analogue & digital devices
•
video input: 1.0Vpp, 75 ohms, composite, BNC connector
•
connection: RS485 port for alarm (I/O)
•
network interface: Ethernet (10/100 Base-T)
•
image compression: jpg
•
video adjustments: brightness, contrast, hue
•
protocols: TCP/IP, ICMP, SMTP, FTP, HTTP, DHCP, DDNS, PPoE, SNTP
•
network function: supports static PPPoE, DHCP, DDNS, TCP/IP
•
hardware:
o
CPU: 32 bits RISC processor
o
ROM: 2Mb FlashROM
o
RAM: 16Mb SDRAM
o
1 x RJ45 for 10/100 Mbps Ethernet
o
LEDs to indicate Link/Act status
o
GPIO with e-mail trigger
•
resolution: VGA: 704 x 576 / CIF: 352 x 288
•
performance:
o
video throughput: up to 25 frames / second
o
network throughput: up to 700kb/s
•
trigger & action:
o
triggered by GPIO input
o
action: image is e-mailed to specified addresses
•
software upgrade: via FTP site
•
security: 3-layer password protection
•
power supply: DC 12V / 500mA (adapter 230V-12V incl.)
5. Description
1.
LAN:
Connect the
VWS2E
to the internet or LAN by means of a cable or connect it directly to the PC with a pass-
through cable.
2.
VIDEO INPUT:
Connect to a video source, such as a camera or DVR video output.
3.
ALARM I/O:
Connection to control devices, such as a PTZ, DVR or an external alarm signal input.
4.
DC12V INPUT:
Power adapter input.
5.
RESET:
Press this button (at the bottom of the
VWS2E
) to return to the default settings.
