![background image](http://html1.mh-extra.com/html/velleman/velbus-vmb1ry/velbus-vmb1ry_manual_4072823003.webp)
Velbus manual VMB1RY– edition 1 – rev.1.0
3
Features:
◊
Relay output: changeover contact (N.O. and N.C.)
◊
Switching capacity with a resistive load: 16A/230Vac max.
◊
Switching capacity with an inductive load: 8A/230Vac max.
◊
Suppressed relay contacts.
◊
Manual control on the module
◊
LED indicators for:
•
Relay output
•
Operation modes (slow, fast, very fast or 2 x blinking and continuously ON)
•
Power voltage
•
Data reception and forwarding through VELBUS
◊
10 different operation modes (adjustable through ‘mode’l rotary switch):
•
Moment control
•
On/off control
•
Start/stop timer
•
Staircase lighting timer
•
Non-restartable timer
•
Switch-off delay
•
Switch-on delay
•
Start timer by releasing push button
•
Timer with blinking effect
•
2-way timer (short press will start timer 1/ long press will start timer2)
◊
16 possible time settings (adjustable through ‘time1’ rotary switch): moment - 5s - 10s - 15s - 30s - 1min - 2 min
- 5min - 10min - 15min - 30min – 1h – 2h – 5h – 1day – on/off
◊
9 possible time settings for timer 2 (adjustable through ‘time2’ rotary switch): 5min - 10min - 15min - 30min – 1h
– 2h – 5h – 1day – on/off
◊
Controllable by connecting several push buttons in parallel.
◊
Push button input debounce: 65ms.
◊
Control through VELBUS.
◊
Programmable without PC.
◊
Easy learning process by controlling the push buttons in the learning mode.
◊
8 different control possibilities:
•
Using push buttons turning on the relay.
•
Using push buttons turning off the relay.
•
Using push buttons turning the relay on or off.
•
Using push buttons activating the set mode on the module.
•
Using push buttons starting or stopping the timer.
•
Using push buttons starting or stopping the 2nd timer.
•
Using push buttons starting or restarting the timer.
•
Using push buttons starting or restarting the 2nd timer.
◊
Memory for 7 different push buttons per command
◊
Learned push buttons are saved in case of a power failure.
◊
Report to control modules for LED status modification.
◊
247 possible addresses (adjustable through ‘ADDR” rotary switch)
◊
Required power voltage: 12 to 18VDC
◊
Consumption in standby: 35mA at 18V (15mA at 16V)
◊
Consumption activated relay: 85mA at 18V (60mA at 16VDC)
◊
Max. consumption (activated relay and push button input): 100mA at 18V (75mA at 16VDC)
◊
Standard DIN-rail housing (2 modules)
◊
Dimensions (L x W x H): 90 x 36 x 58mm.
◊
Weight: 100g.