4
Assembly hints
1.3 Soldering Hints :
1-
Mount the component against the PCB surface and carefully solder the leads
2-
Make sure the solder
joints are cone-shaped and shiny
3-
Trim excess leads as close as possible to the solder joint
REMOVE THEM FROM THE TAPE ONE AT A TIME !
AXIAL COMPONENTS ARE TAPED IN THE
CORRECT MOUNTING SEQUENCE !
Summary of Contents for K8099
Page 12: ...12 Schematic diagram base Schematic diagram...
Page 13: ...13 Schematic diagram display Schematic diagram...
Page 14: ...14 PCB Main PCB...
Page 15: ...15 PCB Display PCB...
