HAA55_v2
VELLEMAN
- 4 -
5. Sensitivity Setting
Turn the PIR adjustment trimmer to the right to diminish; turn the trimmer to the left to increase.
Turn the M/W adjustment trimmer to the right to increase the microwave induction sensitivity; turn the trimmer to the
left to decrease the sensitivity.
6. First Test
Set JP1 to ON and power the detector. You will see the 3 LEDs blink. The unit will enter the working mode after 60
seconds.
•
Testing the PIR sensor
Set JP3 to 4s, set JP2 to OFF. Move in front of the detector. The green and the red LED should light respectively.
•
Testing the glass break sensor
Set JP2 to 4s; set JP3 to ON. Close the housing. Move in front of the detector. The yellow and the red LED
should light respectively.
7. Technical Specifications
Power Supply
9~12VDC
Current Consumption
Standby 14mA
Operational 22mA
Detection Distance
PIR ±
10m
Glass ±
6m
Detection Angle
105°
Warm-Up Time
30s
Alarm Time
2s/4s
Alarm Output
28VDC/100mA
Tamper Switch
28VDC/100mA
Dimensions
135 x 70 x 56mm
Total Weight
130g
Operating Conditions
-20°C~50°C / 95% RH max.
The HAA55 can provide valuable protection for your home and property when utilized correctly. However,
this unit cannot guarantee complete protection against burglary and robbery. Therefore, VELLEMAN
®
nv
cannot be responsible for any loss or damage which could occur.
For more info concerning this product, please visit our website www.velleman.eu.
The information in this manual is subject to change without prior notice.
