VISITOR CODES (FOR OUTPUT 1 ONLY) (Location 40)
The Visitor Codes are the temporary user codes for operating of the
Output 1
(mainly for door strike in access control).
They can be programmed as “
One Time Codes
” or “
Codes with Time Limit
”. The Visitor Codes will be cleared
automatically after use if they are one time codes, or, when the allowed time expires.
VISITOR ID
50 Visitor IDs for storing the codes. They are represented by a
Two-digit ID Number of
01
to
50
.
0999
=
Clear all the Visitor Codes from Location 40.
Please
see the Programming example below for the details.
VALID PERIOD
The codes in this box MUST be two digits and they represent the time of the operation.
00
--- One Time Code
One Time Code has no time limit but it can only be used for ONCE.
It is cleared by the system automatically after use.
01
-
99
--- Time Limit in Hour(s)
The Visitor Code can be set with the valid time limit of 1 Hour to 99 Hours with a
two-digit number of 01 to 99. The visitor code is cleared by the system when
the time limit reaches.
VISITOR CODES
When a new Visitor Code is put in the same Code box, the old code is replaced.
The Visitor Codes can be 4-8 digits for the Manual Mode code entry.
The Visitor Codes MUST be in the same digit length with the Master Code for Auto Mode code entry.
NOTE: All Visitor Codes will be cleared after power down to prevent extension/confusion of their valid time limit.
EXAMPLES:
Example 1:
Set a “One Time Visitor Code” with the number of “1 2 6 8” for the Output 1
40
01
00
1268
#
(a) (b) (c) (d) (e)
(a)
Visitor Code Programming,
(b)
The Visitor ID,
(c)
An One Time Code,
(d)
The Visitor Code,
(e)
Entry Confirmation
Example 2:
Set a “Visitor Code” with the number of “1 3 7 8” that is valid for three hours for the Output 1
40
02
03
1378
#
(a) (b) (c) (d) (e)
(a)
Visitor Code Programming,
(b)
The Visitor ID,
(c)
Valid for 3 Hours,
(d)
The Visitor Code,
(e)
Entry Confirmation
Example 3:
Delete a “Visitor Code” from Vistor ID
02
in the memory
40
02 #
(a) (b) (c)
(a)
Visitor Code Programming,
(b)
The Visitor ID,
(c)
Delete Confirmation
Example 4:
Clear all “Visitor Codes” from Location
40
40
0999 #
(a) (b) (c)
(a)
Visitor Code Location,
(b)
The Deletion Command Code,
(c)
Confirmation, all Visitor Codes are cleared
4-8 DIGITS
40
#
01
-
50
00
or
01
-
99
VISITOR CODE
VALIDATION
LOCATION
VISITOR ID
VALID PERIOD
19
HAA2890_Manual.indd 29
24/05/2012 15:21:14
