manualshive.com logo in svg

Velleman HAA2890, Programming & Installation Manual

Share
Download
Velleman HAA2890 Programming & Installation Manual Download Page 17

EXAMPLES – PROGRAMMING AND OPERATION

                                                                                                                                                   

1) Example 1 -- EM Card Only :

i) Programming :

10

 

1

 

001

       

#

     (a)        (b)       

  

  (c)                (d)           (e)

(a) The card is programmed for operating of the Output 1
(b) The operation is EM Card only
(c) Take ID number 001 in Group 1 to store the card, which is one of the IDs in 000-999
(d) Put the card close to the reader to read it, one beep confirms the reading
(e) Press # to store the “Card” into memory, two-beep confirms a valid entry

ii) Operation : (while the system is back to operation mode)

 
          (a)
a)Put the EM card close to the reader. Two-beep confirms the card is read and the Output 1 activates

2) Example 2 -- Private User PIN Only :

i) Programming :

10

 

2

 

002

 

1234

 

#

      (a)  

   

   (b)          (c)                   (d)             (e)

(a) The Private User PIN is programmed for operating of the Output 1
(b) The operation is Private User PIN only
(c) Take ID number 002 in Group 1 to store the Private User PIN, which is one of the IDs in 000-999
(d) Put Private User PIN “1 2 3 4” into the storage location
(e) Press # to confirm and store the “Private User PIN” into memory, two-beep confirms a valid entry

ii)Operation : (while the system is back to operation mode)

 

1234

 

#

           (a)              (b)
(a) Key in the Private User PIN “1 2 3 4”
(b) Confirm it with the # key. Output 1 activates

3) Example 3 -- EM Card + Secondary User PIN :

i)  Programming :

 

10

 

3

 

003    

 

24680

 

#

        (a)        (b)           (c)                 (d)                       (e)                (f)
(a) The card is programmed for operating of the Output 1
(b) The operation is EM Card + Secondary User PIN
(c) Take the ID number 003 in Group 1 to store the Card & PIN, which is one of the IDs in 000-999
(d) Put the card close to the reader. One beep confirms the reading
(e) Put Secondary User PIN “2 4 6 8 0” into the storage location
(f) Press # to store the “Card + Secondary User PIN” into memory, two-beep confirms a valid entry

ii) Operation : (while the system is back to operation mode)

    24680

 

#

           (a)                       (b)               (c)
(a) Put the EM card close to the reader. Two-beep confirms the reading and 30 seconds waiting time is given for the 

entry of the User PIN, the Amber LED keeps flashing

(b) Key in the Secondary User PIN “2 4 6 8 0”
(c) Confirm it with the # key. Output 1 activates

Read Card

Read Card

Read Card

Read Card

17

HAA2890_Manual.indd   33

24/05/2012   15:21:14

Summary of Contents for HAA2890



































Reviews:

No comments

Brands by name

Popular brands

Load more brands