EVM892
29.04.2010
©Velleman
nv
3
User manual
1.
Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the
device after its lifecycle could harm the environment. Do not dispose of
the unit (or batteries) as unsorted municipal waste; it should be taken to
a specialized company for recycling. This device should be returned to
your distributor or to a local recycling service. Respect the local
environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before
bringing this device into service. If the device was damaged in transit, don't install
or use it and contact your dealer.
The
DVM892
is a 600V CAT II digital multi-meter with a 3½ digit LCD. This device
is can be used to measure direct and alternating voltages, direct and alternating
currents, resistance, continuity, capacity, temperature, frequency, diode and
transistors (hFE).
Be very careful when using this device: carelessness can lead to serious or even
fatal injury. Besides the usual safety-precautions for working with electrical circuits
you must follow the safety guidelines as described in this manual.
Do not
use this
device if you do not have preliminary knowledge of circuits and test procedures.
This device is not suitable for commercial or industrial use.
Refer to the
Velleman® Service and Quality Warranty
on the last pages of this
manual.
2.
Used symbols
This symbol indicates: Read instructions
Not reading the instructions and manual can lead to damage, injury or
death.
This symbol indicates: Danger
A hazardous condition or action that may result in injury or death
This symbol indicates: Risk of danger/damage
Risk of a hazardous condition or action that may result in damage, injury
or death
This symbol indicates: Attention; important information
Ignoring this information can lead to hazardous situations.
alternating: A = alternating current (AC); V = AC voltages
direct: A = direct current(DC); V =DC voltages
Double insulation (class II-protection)
Earth
Fuse
Resettable fuse
Diode