![background image](http://html1.mh-extra.com/html/velleman/camip7n/camip7n_user-manual_861730005.webp)
CA MIP7N
V. 05 – 05/06/2014
5
©Ve lleman nv
6.
Hardware installatio n a nd operation
1.
Choose a location for the came ra, ke eping following guidelines in
m ind:
o
Do not install the came ra in locations whe re ex treme ly high or
low te mpe ratures or ex ce ssive vibrations may occur.
o
Avoid mounting the cam e ra near high ele ctro-magne tic fie lds.
o
Do not aim the came ra at the sun or othe r e x tre me ly bright
obje cts.
2.
The came ra can be used free standing or in com bination with the
include d m ounting brack e t. W he n the m ounting bracket is use d,
attach it to the wall or ce iling using the 2 included scre ws. Place
the cam e ra on top and se cure it with the centre scre w.
De te rm ine the desired angle and tighte n the joint scre ws.
3.
Conne ct the ante nna [6] to the antenna conne ctor and/or
conne ct a ne twork cable (included) to the 8P8C (R J45) jack [9].
Note : it is possible to conne ct the came ra straight to the 8P8C
(R J45) port of a compute r. In this case a crossed cable (not
incl.) should be use d and ne twork se ttings must be configure d
manually.
4.
An ex te rnal m icrophone (not incl.) can be conne cte d to the
audio input [8].
5.
W he n desired, an ex te rnal speake r system can be conne cte d to
the audio output [7].
6.
Plug the DC conne ctor of the powe r adaptor into the 5VDC input
jack [12]. O nly use the include d adaptor or one with the same
spe cifications.
7.
Plug the adaptor into a suitable mains outle t (100~240V
AC/50~60Hz).
Notes:
•
It takes about 30 se conds for the cam e ra to initialise .
•
During initialisation the came ra will start moving to test the
pan/tilt functionality.
•
If the im age appe ars out of focus, turn the le ns [4] to adjust.
7.
Installing the software
To use the came ra, you need to install the software IP Came ra Tool
on your compute r.