Veit Brisay BRI-7570/101 FPD, Instruction Manual

Page: 19 / 72

Potential dangers
14.02.11 BRI-7570_020 15
3. POTENTIAL DANGERS
The safety systems and safety instructions described in these
operating instructions must be observed.
The machine is operated from the front.
The operator’s working area and the access to the machine
must be kept free of tools and other devices. The working area
at and around the machine must be clean and accessible.
Never place tools or other objects on the machine. Due to vi-
brations, such objects may fall into the machine and cause se-
vere damage.
The closing movement of the heating plate may cause bruises
and burns !
Particular care must be taken when setting up and servicing
the machine since the risk of
burns and bruises is increased!
When setting-up the machine
-
protective gloves must be worn when handling heated
parts of the machine to avoid
burns and
-
safety boots must be worn to avoid bruises.
Never leave the machine unattended. There is a danger of
fire , if the heating plate remain closed over a longer period
during operation.
Do not wear open, long hair, loose clothes or jewellery. It in-
creases the
risk of injury because they might get caught in
the machine or be subject to heat!
When carrying out installation work above body height, the
provided ladders or service platforms must be used or any
other ladder meeting the required safety standards. Do not
climb on components of the machine -
danger of falling ! A
safety harness should be worn when carrying out maintenance
work in greater heights.
Welding, burning, and grinding work on the machine must only
be carried out, if this work has been explicitly approved. There
might be a
risk of fire and explosion !
Remove any dust and inflammable material from the machine
and the area around it and see to sufficient ventilation before
carrying out welding, burning and grinding work -
risk of ex-
plosion !