Veilux VP-58CND12X, Instruction Manual

Page: 19 / 40

19
Veilux Model # VP-58CND12X User Manual
QUICK OPERATING KEYS
[VICON PROTOCOL]
If user wants to choose Vicon Protocol, the user may change the dip switch first.
(Refer to Page #36 DIP SWITCH SETTING - PROTOCOL) Baud Rate: 4800 (Vicon
default)
The operation system is almost same as Pelco D/P protocols but some special features are
different way as noted below’
<Quick Operation Key Table 2: VICON>
<Quick Operation Keys Table 2> Use these function keys if controller has these keys>
Website: www.Veilux.net Phone # 1-800-510-6528
Number Note Function
1 ~ 79 +Preset PRESET Execute Preset 1 ~ 79
80~87 +Preset GROUP TOUR Execute Group Tour #1 ~ #8
88~89 +Preset PATTERN Execute Pattern #1 ~ #2
90 + Preset Focus Mode Set Focus Mode Toggle to Auto or Manual
90 + Preset Save Pan/Tilt Lockout PAN/TILT Lock or Unlock setting
91 + Preset Save ZERO POSITION Search For Pan / Tilt Zero Position
92 + Preset Save ALARM Selectable Enable/Disable all Alarms
93 + Preset Save BLC MODE Selectable On/Off in BLC function
94 + Preset Save OSD MAIN MENU To enter OSD Main Menu
95 + Preset Save D/N MODE Selectable Day/Night Mode (Auto/Day/Night Mode)
96 + Preset Save SECTOR SECTOR setting menu entrance
97 + Preset Save DOME Reset Initial DOME Reset - Rebooting
98 + Preset Save AUTO PAN AUTO PAN setting menu entrance
99 + Preset Save Pan/Tilt Speed Manual Pan/Tilt Max Speed setting
Menu Function
Tilt Up / Down Sub menu cursor moves up / down
Pan Left / Right Enter to the sub menu or status change or decrement
A/P Using for Enter key when user select YES or NO
A/I Using for function changing keys when set coordinate
Zoom Tele Status cursor to the right
Zoom Wide Status cursor to the left