25
SYSTEM STATUS
PROTOCOL
: PELCO D, P
BAUD RATE : 2400 BPS
FIRMWARE VER. : X.XX
UPGRADED DATE : YY.MM.DD
CAMERA MODULE : XXXXXXXX
[PREVIOUS PAGE]
INITIALIZATION
[TOUR CLEAR] [PRESET
CLEAR] [SECTOR CLEAR]
[PRIVACY CLEAR] [PATTERN
CLEAR] [LOAD OPTIMIZED DE-
FAULT] [PREVIOUS PAGE]
TOUR CLEAR
ARE YOU SURE? YES NO
TOUR CLEAR
Veilux Model # VP-58CND12X User Manual
OSD MENU SETTING
B-8-4. DOME SET - [NEXT PAGE] - [SYSTEM STATUS]
This page shows the information of this camera.
DEFAULT SETTING
- Protocol and baud rate are shown according to the dip switch setting (Refer to page 36,
37)
- Firmware version and upgraded date will be changed if the dome has been upgraded.
- The camera module type is stated as follows.
● SDM100 : SAMSUNG 10X ZOOM CAMERA MODULE.
B-8-5. DOME SET - [NEXT PAGE] - [INITIALIZATION]
To clear the current settings select the item that you wish to reset back to factory defaults.
- To clear the memorized data, move the joystick or pan right key until the cursor is on the
required item.
Website:
www.Veilux.net
Phone # 1-800-510-6528
