8
3 Mounting
VEGAPULS WL 61 • 4 … 20 mA/HART two-wire
47095-EN-140801
3 Mounting
3.1 Mounting versions
Most simply mount the instrument via the straining clamp. For this
purpose, the connection cable is provided with a strain relief wire of
Kevlar.
In order to avoid faulty measured values, make sure that the sensor
does not oscillate.
> 200 mm
(7.87")
Fig. 2: Mounting via a straining clamp
For a rigid mounting, a mounting bracket with opening for thread
G1½, e.g. from the VEGA product range, is recommended. The
mounting of the sensor in the bracket is carried out via a G1½ counter
nut of plastic. Take note of chapter "
Mounting instructions
" for the
distance to the wall.
Straining clamp
Mounting bracket