11
3 Mounting
VEGAPULS WL 61 • 4 … 20 mA/HART two-wire
47095-EN-140801
You can find drawings of these mounting options in chapter "
Dimen-
sions
".
Fig. 8: Mounting by means of an adapter flange, for example, on a manhole lid.
3.2 Mounting preparations, mounting strap
The optional mounting strap is supplied unassembled. It must be
screwed to the sensor before setup with the attached screws. Max.
torque, see chapter "
Technical data
". Required tools: Allen wrench
size 4.
There are two different variants of screwing the strap to the sensor.
Depending on the selected variant, the sensor can be rotated in the
strap infinitely variable through 180° or in three steps 0°, 90° and
180°.