36
6 Setup
VEGAMIP R62 • Receiving unit
41911-EN-200522
With the two keys you can select the requested switching delay ac-
cording to the following illustration.
The switching delay can be adjusted in seven steps between 100 ms
and 20 s.
200
ms
100
ms
500
ms
1 s 2 s 5 s 20 s
Fig. 33: Adjust switching delay - LED indication flashes
If the indication moves to the right, the switching delay will be longer,
to the left shorter.
The indication returns automatically to the indication of the actual
receive level after approximately 10 s.
If possible, simulate a filling between emitting and receiving unit
with your hand or a metal sheet and check if the switching point is
adjusted correctly. If the control lamp changes its switching status, the
switching function is correct
Simulation
