Vega VEGABAR 53, Operating Instructions Manual, Page: 20 / 60

6 S etup with the indicating and
adjustment module PLICSCOM
6 . 1 S hort description
T he indicating and adjustment module PLICSCOM is used for
measured value display , adjustment and diagnosis . I t can be
mounted in the following housing versions and instruments :
l
A ll sensors of the plics
®
instrument family , in the single as
well as in the double chamber housing ( optionally in the
electronics or connection compartment )
l
E xternal indicating and adjustment unit VEGADIS 61 .
N ote :
Y ou will fi nd detailed information on the adjustment in the
operating instructions manual of the indicating and adjustment
module PLICSCOM .
6 . 2 I nstalling the indicating and adjustment
module PLICSCOM
PLICSCOM can be inserted or removed at any time . I t is not
necessary to interrupt the power supply .
T o mount , proceed as follows :
1 U nscrew the housing cover
2 P lace PLICSCOM in the desired position on the electronics
( you can choose any one of four di ff erent positions - each
displaced by 90 ° )
3 P ress PLICSCOM lightly onto the electronics and turn it to
the right until it snaps in .
4 S crew housing cover with inspection window tightly back
on
R emoval is carried out in reverse order .
PLICSCOM is powered by the sensor , an additional con -
nection is not necessary .
F unction / C on fi guration
I nsert / remove PLICSCOM
20 VEGABAR 53 - P ro fi bus PA
S etup with the indicating and adjustment module PLICSCOM
28250
-
EN
-
051004