Vega Ketron, Owner'S Manual

Page: 77 / 122

F10 Normal: This resets the standard tuning.
When the modifications have been completed, save the scale in one of the thirteen available memory locations.
Press
SAVE/ENTER to access the list of memory locations that can be selected using the /- push
buttons. F10 Save saves the scale in the location selected at the time and F5 Escape returns to the previous
page. The thirteen Arabic scales saved can be easily called up while playing live using the optional pedal switch-
es FS 6 and FS 13.
F3 Harm. Mode: This makes it possible to use the HARMONY push button to activate the Arab scale instead of calling up the Harmony
function.
F4 Password: This is used to set a password for those Hard Disk folders requiring it (see chapter Disk, Lock function) to protect data
writing and reading. The password is assigned to the Hard Disk folders by pressing the
F1 Modify button. If no pass-
word has been assigned yet, use the keys of the keyboard to write the new name into the New line. The name must
consist of no more than six letters. Press F10 Confirm to confirm. If an old password exists and you wish to modify it,
first of all write the old name into the Old line and then the new name into the New line. Finally, press F10 Confirm to
confirm. F5 Escape takes you back to the main page of the display.
F5 Page Memo: This stores the last page of each menu that will be displayed the next time the same menu is called up.
F6 Video: This is used to select the type of video output signal using the VALUE +/- push buttons, between PAL (European tel-
evision system), NTSC (American television system), SVHS Pal (super VHS European), SVHS NTSC (super VHS
American), Monitor (VGA monitor for computers), OFF (video card disabled).
F7 Disp. Time: The value entered using the VALUE +/- push buttons establishes the time that the page in use remains displayed, at
the end of which the VEGA returns to the main page of the display. Set as Off , the page in use remains displayed until
another page is manually accessed or cancelled.
F8 Disp. Mode: When set to Autoclose , the page from which the Voices and the Styles are selected, closes after the selection has
been carried out and the previous displayed page is shown again.
F9 Style Sel: Defines the Styles selection mode. When set to Group , the selection is carried out using the Styles groups correspon-
ding to the relevant push buttons like on the SD1. When set to Numeric , the Style is called up by entering the three
numbers on the numeric keypad ( STYLES push buttons), like on the X-series.
F10 Voice Sel: This is used to select the call-up mode of the Voices. In Mode 1 the last Voice selected within a single family is always
automatically called up when that group is selected. To change it, simply select another Voice within the same family. In
Mode 2 the Voice is enabled only after it has been selected within the selected group using the function push buttons,
so that the Voice in use is not replaced just by calling up a family, but by the actual selection of the voice to be used.
VEGA
76
Utility