Vega Ketron Owner'S Manual Download Page 37

Page: 37 / 122

F7 Pianist Sustain:

Activates or otherwise the

Sustain

function in the

Pianist

mode, so you can use the

Sustain

pedal to ‘freeze’ the last

recognized chord and to freely play, right after having set the chord, along the complete keyboard. Releasing the sus-
tain pedal will allow the VEGA to recognize the next valid chord played anywhere on the keyboard.

F8 Pianist Mode:

Enables selection of the

Pianist

mode. The

AUTO

mode, set by default, requires at least a chord of three notes, played

no matter where, to acknowledge a chord. Once the chord has been acknowledged, this can be maintained playing a
melody with not more than two notes played at the same time. The

Standard

mode, is obtained using the Sustain

pedal. If the

Sustain

pedal is pressed right after having set the chord on the keyboard, the

Arranger

uses only the

chord that was acknowledged before the

Sustain

was activated. It is possible to disable the

Sustain

on the timbre in

use to utilise the

Sustain

pedal exclusively for the

Pianist

function, using

F7 Pianist Sustain

F9 Vocalizer:

This activates the

Vocalizer

effect on the microphone input.

F10 Rotor Wheel:

When selected, this function makes it possible to control the Rotor speed using the Modulation Wheel. If Modulation
Wheel is not selected, the Rotor activation will be controlled with the Sustain pedal just for a few organ voices pro-
grammed for this function.

PLAY CONTROL: SECOND PAGE

F1 2ND Sustain:

Activates or deactivates the Sustain on the Second Voice

F2 2ND Split:

This is used to define the split point of the keyboard, dedicated to the Right section, above which the timbre assigned
to Second Voice will not be playing. The relevant note can be selected using the keyboard.

F3 Velocity Curve:

This selects a different reaction curve for the Right voice, to be chosen among Normal, Hard 1, Hard 2, Soft 1, Soft 2 or
Fixed with a value to be programmed with the

VALUE +/-

push buttons.

F4 2ND Voice Edit:

After having pressed the

function button, it will be possible to use the Voice push buttons to select a new voice to

assign to the Second Voice. Press

EXIT

after having completed the selection, or save pressing

Save/Enter

F6-2nd

Voice

and

F10-Save

F5 2ND VOICE:

This enables the second voice function.

F6 Registr:

This enables the registration.

F7 Bassist:

The

Bassist

function automatically activates the

Manual Bass

on the left keyboard section and the

Pianist

mode on

the right keyboard section and has the

Manual Bass

acting also on the acknowledgement of the chord played. Every

time you take off your hand from the right keyboard section, the chord played last on the right section remains in
memory (if the

Hold

push button is activated) whereas the

Bass

can be played freely without affecting the chord. This

is a cool feature used to reduce the redundancy that can be associated with a style and allows the musician to freely
produce natural, human bass lines in real life.

F8 Drum Remix:

When enabled (on line), this makes it possible to keep selected the

Drum Remix

function in

Song Play

also when other

Midi files are called up.

F9 Bass Boost:

This value can be modified by pressing the

push button repeatedly, and indicates the increase of the frequency

indicated in

F10