Vega Light Control Systems
● Holland, Michigan 49424
2.3. STEP 3: Install retrofit kit in fixture
Power Supply Above or Mid Mount
Power Supply Down below Mounting Plate
Notes:
•
For Type 3, ensure LED head is rotated with
“Street Side” of light engine facing the street (see 1.4.6)
•
Re-use screws previously holding HID ballast to fixture to attach Retrofit Kit when possible. Additional hardware
maybe required.
•
For Post Top fixtures, LED Light should be installed to maintain cooling clearance above heatsink and at arc
tube height of replaced HID.
(see 1.4.5)
•
Restore the original light fixture sealing for water and insect control. Rain water must not enter the wiring
compartment.
CENTER POLE MOUNTING
