Vega Light Control Systems
● Holland, Michigan 49424
2. INSTALLATION INSTRUCTIONS
•
Refer to fixture installation manual for fixture mounting procedures
•
www.vegalightcontrolsystems.com
for additional install instructions
2.1. STEP 1: Prepare fixture for installation
•
Turn power off before attempting installation
•
Remove lamp, original optical components, socket, and ballast
•
Remove internal reflectors or Lite Lid
•
If photocell-controlled, connect unit after external control
WARNING
!
Risk of electric shock
Disconnect power before servicing
WARNING
!
Risk of burn
Allow unit to cool fully before servicing
POST-TOP
Note
: Failure to remove original components
including ballast will void product warranty.
Original optical
components
(reflectors)
Fixture Dome Top
Ballast
Socket
Lamp
Fixture Base
Fixture Globe
Note:
Kits are available for specific
targeted luminaries
Holophane:
Granville Premier cat. No. GVP
Granville Classic cat. No. GV
SHOEBOX
Fixture Cover
Remove:
•
Fixture cover
•
Original ballast
•
Reflector housing
•
Ballast bracket
Save all mounting screws
Note:
Minimum Total
Fixture Dimensions
✓
Width
– 12”
✓
Depth
– 17”
✓
Height
– 6”
Reflector
Housing
Original Ballast
Note:
Kits are available for specific
targeted luminaries
RUUD model PR series
Granville Classic cat. No. GV
