Vega Light Control Systems
● Holland, Michigan 49424
NOTICE
•
TO AVOID ELECTRIC SHOCK, DISCONNECT POWER BEFORE ATTEMPTING INSTALLATION OR SERVICING.
•
TO PREVENT ELECTRIC SHOCK THIS PRODUCT MUST BE PROPERLY GROUNDED.
•
INSTALLATION MUST BE STRUCTURALLY SOUND TO PREVENT PERSONAL INJURY DUE TO FIXTURE COLLAPSE.
•
USE CAUTION WHEN HANDLING DURING OR AFTER OPERATION AS IT MAY BECOME HOT AND CAUSE BURNS.
•
FAILURE TO INSTALL THIS PRODUCT IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE (NEC), OR THE CANADIAN
ELECTRICAL CODE (CSA 22.1), ALL APPLICABLE FEDERAL, STATE AND LOCAL ELECTRIC CODES AS WELL AS THE
SPECIFIC UNDERWRITERS LABORATORIES (UL) SAFETY STANDARDS FOR THE INSTALLATION, LOCATION AND
APPLICATION MAY CAUSE UNSAFE SITUATIONS LEADING TO SERIOUS PERSONAL INJURY, DEATH, PROPERTY
DAMAGE AND/OR PRODUCT MALFUNCTION.
•
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
•
FAILURE OF FIXTURE TO PROVIDE SUFFICIENT WEATHER PROTECTION VOIDS WARRANTY.
•
TO PREVENT EARLY PRODUCT FAILURE, THIS PRODUCT SHOULD BE INSTALLED IN OPERATING ENVIRONMENTS WITH
MAXIMUM MEAN FIXTURE AMBIENT OPERATING TEMPERATURE FOR LED RETROFIT MODULE: 104°F (40
C); MAXIMUM
AMBIENT OPERATING TEMPERATURE CANNOT EXCEED 140°F (60°C).
•
INSTALLATION REQUIREMENTS MAY VARY DEPENDING ON THE LUMINAIRE RETROFITTED.
•
IF UNCERTAIN, CONTACT VEGA LIGHT CONTROL SYSTEMS CUSTOMER SERVICE TO EVALUATE APPLICABILITY TO
, PHONE: 616-259-0700
1.
PRODUCT OVERVIEW
1.1. D4 Post Top Retrofit Specifications
LED Light Engine
•
30W, 40W, 60W, and 80W Versions
•
2200K, 3000K, 4000K and 5000K CCT Available
•
Type 3 and Type 5 Available
•
True photometric performance through silicone optics
•
Dimming Options:
•
0-10vdc dimming available
•
Timer based overnight schedules
Mechanical Details
•
4.73” & 5.91” Diameter Light Engines fit ALL globes
•
Telescoping center post for height adjustment, field settable
•
Universal Mounting plates available in 4 sizes; 6.2
5”, 6.5”, 7” or 8” diameter
•
Brand specific quick change mounting plates also available
•
Power supply housing and bracket designs to mount above, midway, or below globe/fixture base
•
Downlight light option for suspended LED engine in shoeboxes, pendants, and colonials.
Performance Details
•
5 Year replacement warranty, extended warranties available
•
18kA series surge suppression designed to UL1449 3rd edition
•
Drivers qualified to:
•
Life > 50,000 hours
•
power factor of ≥0.9
•
THD
of ≤20%
•
LEDs qualified to:
•
DLC Premium models
– L70 of 100,000 hours minimum, L90 of 36,000 hours min.
•
DLC Standard models
– L70 better than 50,000 hours
