Vega Light Control Systems
● Holland, Michigan 49424
3. ELECTRICAL INSTRUCTIONS
3.1. Wiring diagram after installation
4. RELATED INFORMATION
4.1. Maintenance and Cleaning
•
Periodic cleaning of fixture will ensure operation at maximum optical efficiency
•
Refer to fixture installation instructions for maintenance and cleaning guidelines
•
Even though LED Retrofit Kit may continue to light after the specified lifetime has passed, it must be replaced in
order to maintain appropriate light levels
4.2. List of applicable and related Documents
•
D4 LED Retrofit Kit Product Information Brochure
5. Troubleshooting
Condition
Possible Reason(s)
Recommended Action
AC surge protector
damaged
Surge protector unable to protect
unit
1.
Verify AC voltage at both input and output of surge protector.
2.
If within warranty period, contact VEGA sales representative for RMA.
3.
If out of warranty period, contact VEGA sales representative for
information to replace surge protector.
LEDs are dim or not lit
1.
DC Cable is unplugged.
2.
Power supply has failed
3.
LED board is damaged
1.
Connect the DC Cable by plugging together the two Molex connectors
2.
To identify failed power supply, use clamp meter (tongs) to measure
output current. Replace if below rated current. Before replacing power
supply, verify AC voltage through surge protector.
3.
If within warranty period, contact VEGA sales representative for RMA.
If not within warranty period, LED Light Engine should be replaced as it
is not user serviceable.
Difficulty experienced
during mounting
---
Contact VEGA representative for recommended action
[email protected]
616-259-0700
OR visit
www.vegalightcontrolsystems.com
for additional reference designs.
AC POWER SIDE
120-277 VAC
LED SIDE
36 VDC.
18AWG Wires
Note: AC surge protector to power supply is prewired
