Vega M / User Manual
9
Revision № 09 – 18.06.2020
number from which the message has been received as the
owner's phone number.
3.
Send an SMS-message with the text 1234*35#+XXXXXXXXXXX*
to the SIM-card number of the device, where + XXXXXXXXXXX
is the phone number that the device shall remember as the
owner's phone number.
You should make a call or send an SMS-message to
the SIM-card number of the device within 5 minutes
After 5 minutes the inactivated device switches to emergency
mode in 5 minutes and starts flashing every 8 seconds. In this
case, repeat activation procedure starting from step 2.
STEP 4
After an incoming call or an SMS, the device automatically
identifies the phone number and sends an SMS-message with the
current device settings. The description of the parameters see
chapter "Settings".
Then the device turns on the GPS / GLONASS receiver and
switches to the satellite search mode to identify its own location.
The indicator is flashing every 3 seconds.
To search satellites and identify the coordinates, it is
recommended to place the device in a place where
the sky is clearly seen, e.g. if the device is activated in
a room, bring it to the window
Every time the device identifies its coordinates, it also identifies the
current time and adjusts its internal clock through satellites. Time
setting takes the time zone into account, which is set by the
parameter "P". The default parameter is 03, which means +3 hours
to GMT.
