Vega M / User Manual
14
Revision № 09 – 18.06.2020
"G", see Table 1). After that the device remains connected for 3
minutes to receive possible SMS-commands and switches to the
sleep mode.
3. After this procedure, the device powers off the motion sensor,
and does not respond to movements for the time set in parameter
"47" (ignoring period of the motion sensor, see Table 1). The
default value for this parameter is 5 minutes.
4. After the ignoring period, the sensor switches on again. Next
time the sensor triggers, the device again identifies and sends its
coordinates to the user. In this case, the call, and the message
"Motion sensor has triggered!" are not sent.
5. If there is no movement for 5 minutes after the motion sensor
triggers, the device switches from the sleep mode, identifies and
sends its coordinates to the user so that the user can determine
where the tracking object has stopped.
If, after the motion sensor triggers, the device receives an SMS-
command with the text "999", the motion sensor is disabled until
the next main session, which time is set by parameter "24" (see
Table 1).
PERIMETER GUARDING
The device has a perimeter guard function. When this function is
enabled during the main communication session, the device
identifies whether it is inside a specified geofence or outside it.
Geofence means a circle with a diameter of 1 to 999 km, which
central point has the coordinates identified when this function
was enabled.
If the device detects that the current location is outside the
specified geofence, it makes a phone call to the owner’s phone
number. If the owner answers the call, the device announces
"Alarm! The perimeter of the security zone has been violated”. If
