Vega M / User Manual
15
Revision № 09 – 18.06.2020
the user does not answer within 30 seconds, the device sends an
SMS with a notification.
Geofence violation detection is specified by the parameter Z and
has four setting options:
OPTION 1
Control is OFF. To enable this option, send an SMS-command
with the text "XXXX*Z#0*", where XXXX is the device PIN.
OPTION 2
Control is ON. If the device detects violation of the specified zone,
it performs the above-stated procedure and turns off the control
of zone violation.
To enable this option, send an SMS-command with the text
"XXXX*Z#YYY*", where XXXX is the device PIN, and YYY is the
diameter of the security zone.
OPTION 3
Control is ON. If the device detects violation of the specified zone,
it performs the above-stated procedure and keeps controlling the
security zone violation each main session, which time is set in the
parameter "24" (see the chapter "Settings").
To enable this option, send an SMS-command with the text
«XXXX*Z#2YYY*», where XXXX is the device PIN, and YYY is the
diameter of the security zone.
OPTION 4
Control is ON. If the device detects violation of the specified zone,
it performs the above-stated procedure and sets a new security
zone, which center is the coordinates identified in the current
session.
