Vega M / User Manual
11
Revision № 09 – 18.06.2020
communication sessions (parameter "12", see table 1) the device
switches on only for receiving possible SMS-commands and
synchronizing with the server. You can obtain the coordinates in
the intermediate session by sending an SMS-command with the
text "500" or "09" to the device. If the command is sent from the
unknown number, add the device PIN ("XXXX500" or "XXXX09")
before the command. The default PIN is 1234.
When the command "500" is received, the device identifies and
sends coordinates in the text form (see Appendix, example No. 4).
When the command "09" is received, the device identifies and
sends coordinates in the form of an active Internet link. By clicking
the link, the user can see the location of the object in Google or
Yandex-maps.
«TEST» MODE
In the «TEST» mode, the device identifies and sends its
coordinates in the form of SMS or to the server (depending on the
parameter "G", see table 1) every hour within 24 hours after
switching to this mode. After 24 hours the device automatically
switches to "BACKGROUND" mode.
To activate the "TEST" mode, send an SMS-message to the SIM-
card number of the device with the text "911" from the owner's
phone number. If the command is sent from the unknown
number, add the device PIN ("XXXX911") before the command. The
default PIN is 1234.
To deactivate the «TEST» mode, send an SMS-message to the
SIM-card number of the device with the text "999" from the
owner's phone number.