Vega M / User Manual
10
Revision № 09 – 18.06.2020
STEP 5
After identifying the coordinates, the device registers again in the
network and sends an SMS-message with the coordinates of the
device. After sending the coordinates, the device switches to
standby mode, waiting for SMS-messages with settings or
commands from the user. The device stays 5 minutes in this mode
and then switches to sleep mode and operates in the
"BACKGROUND" mode. While waiting for SMS with settings and
commands, the indicator is flashing three times every three
seconds.
If the device is enabled, when changing the batteries
or pressing the «reset» button on the top of the
device, do not perform step 3
If after turning off the device the SIM-card has been
changed to another one, repeat all steps, i.e. re-
activate the device
OPERATION MODES
BACKGROUND MODE
The "BACKGROUND" mode is the basic mode of the device
operation. In this mode, the device is inactive most of the time.
The device becomes active only during communication sessions
from one to three times per day, depending on the settings. The
time of the main session and the quantity of the device's
communications are set in parameters "24" and "12" respectively.
The default settings are configured so that the device
communicates once a day at 12.00.
The device identifies its coordinates only during the main
session (parameter "24", see table 1). During additional