M-BUS-1 / User Manual
25
Revision 10
-
«
VEGA MBUS-1
»
TAB
The
“
Vega MBUS-1
”
tab contains the settings of the connected device.
Current state
–
displays the current parameters of the device - the internal temperature
of the device, the battery level and the current LoRaWAN class.
M-BUS settings
–
allows to setting M-BUS interface, set the model and addresses of
connected heat meters. Addresses are setting up in the case of converter operation in the
independent poll mode of the metering devices. In the case of converter operation in
transparent mode the setting up of addresses is not required. M-BUS-1 uses the secondary
addresses for poll of the connected devices. The secondary address usually is equal to meter
serial number.
Data transmission settings
–
a group of parameters that allows you to configure the
collection and transmission periods, and the time zone for the internal clock of the device will
be set which. The readings are read from the connected device at 00.00 on the internal clock of
