M-BUS-1 / User Manual
18
Revision 10 - 27 May 2019
“DEVICE INFO” TAB
The "Device info" tab displays information about the device, its current status, and also
the data needed to register the device in the LoRaWAN network.
ABP info - displays the data necessary to register the device in the LoRaWAN network
with ABP method (Activation By Personalization).
OTAA info - the data required to register the device in the LoRaWAN network with OTAA
method (Over The Air Activation) is displayed.
Key management (not displayed in the "Simple" mode) - allows you to change the factory
keys to register the device on the network, and also reset the keys back to the factory settings.
Device info - the configurator reads information about the device model, its firmware
and automatically corrects the device's time when connected to it.
Update firmware - allows you to select the firmware file from your computer's hard drive
and load it into the device. The device will automatically disconnect from the configurator
when the download is complete. The current version of the device firmware can be
downloaded from
iotvega.com
.
Network info - shows whether the device is connected to the LoRaWAN network and its
network address.
Join network button - launch the LoRaWAN network connection procedure with the
previously selected ABP or OTAA method. If the device is already connected to the network,
reconnection procedure will occur.
