VeEX VePal TX130M+, User Manual

Page: 145 / 175

Press the Stop button to terminate the test. If Save TIE to USB is set to ON, then remove the USB memory stick from the test
set, bring it to a computer, and open it with the VeEX Wander Analysis PC software, for further MTIE, TDEV, and masks analysis
(refer to the MTIE and TDEV Analysis section).
Both, Wander Analysis and MTIE / TDEV Post Analysis are optional features.
PDH Wander Measurements Menu
Go back to top Go back to ToC
21.9 V.54
The V.54 menu features the Loop Up and Loop Down functions for Loopback testing. Tap on
Loop Up
or
Loop Down
to create
or cancel a loopback.
V.54 Main Menu Loopback Message
Go back to top Go back to ToC
_e-manual_D07-00-051P_RevD00