1
Introduction
This manual contains installation instructions for the Veeder-Root Mag-FLEX probe. Procedures contained within
this manual include:
• Site layout considerations
• Installing the Mag-FLEX
• Cabling between the Mag-FLEX and the TLS Console
• TLS Console used with the Mag-FLEX
Tank Gauge Requirements
The Mag-FLEX is a digital flexible probe designed to measure product temperature, product level and water level
in large storage tanks. The Mag-FLEX probes can measure liquid heights of up to 9.9 metres with TLS2 consoles
and up to 22 metres with TLS-3XX and TLS4/TLS-450 consoles (reference table below). For storage vessels with
maximum liquid levels up to 3.66 metres it is recommended that a Veeder-Root Mag Plus probe be used.
Related Documents
It is important that installers have knowledge of all relevant procedures before commencing work. Read and
understand all manuals thoroughly. Do not to undertake work without understanding safety and required
installation practices. For ATG installation and set-up refer to the appropriate TLS manual.
Contractor Certification Requirements
Service Technician Certification (Previously known as Level 2/3):
Contractors holding valid Technician
Certifications are approved to perform installation checkout, startup, programming and operations training, system
tests, troubleshooting and servicing for all Veeder-Root Series Tank Monitoring Systems, including Line Leak
Detection.
TLS-3xx Technician Certification:
Contractors holding valid TLS-350 Technician Certifications are approved to
perform installation checkout, startup, programming and operations training, troubleshooting and servicing for all
Veeder-Root TLS-300 or TLS-350 Series Tank Monitoring Systems, including Line Leak Detection and associated
accessories.
TLS-4xx Technician Certification:
Contractors holding valid TLS-450 Technician Certifications are approved to
perform installation checkout, startup, programming and operations training, troubleshooting and servicing for all
Veeder-Root TLS-450 Series Tank Monitoring Systems, including Line Leak Detection and associated accessories.
All service personal on site must comply with all recommended safety practices identified by OSHA and your
employer.
Review and comply with all the safety warnings in this and any related documents, and any other Federal, State or
Local requirements.
Warranty Registrations
may only be submitted by selected Distributors.
Console with Mag-FLEX
Max Height (metres)
Max Volume (litres)
Front Panel
Serial Line
Front Panel
Serial Line
TLS2
9.9
9.9
984,100
984,100
TLS-300
22.0
22.0
3,785,408
3,785,408
TLS-350
22.0
22.0
3,785,408
3,785,408
TLS-450
22.0
22.0
9,999,999
9,999,999
