Mag-FLEX Probe Overview
Mag-FLEX Probe Length Calculation
12
Mag-FLEX Probe Length Calculation
Before ordering the Mag-FLEX Probe, an accurate dimension for “A” must be obtained. Measure internally the
Insertion Length ‘A’ from the 1½” entry point to the bottom of the tank (see diagram below). Probe length for
ordering purposes = A + 250 mm.
Probe Handling
It is important to handle the Mag-FLEX probe with care at all times during the installation. Avoid excessive bending
of the probe especially at the points the ridged sections meet with the flexible shaft. Below you can see examples
of mishandling that would cause irreversible damage to the probe and invalidate the terms of warranty.
