34
V EC T RON POS MObIl EPRO III
4 .1. 2. Vectron POS MobilePro III Shutting down
•
Press simultaneously the on-/off key
at the bottom left
on the keyboard and the soft key
on top right on the
keyboard until the status-LEDs blink blue and green and the
vibration motor is released briefly.
•
Release both keys.
The message "The system will shut down" is displayed.
As soon as the status-LEDs go out the
Vectron POS MobilePro III is switched off.
4 .1. 3. Hardware reset
NOTICE
a
Data loss through hardware reset
Since the system is not shut down properly
with a hardware reset, this can cause data
loss.
X
Only use the hardware reset when the
system cannot be shut down.
In order to switch off the POS system independent of the POS
software you can carry out a hardware reset.
•
Press simultaneously the on-/off key
at the bottom left
on the keyboard and the soft key
on top right on the
keyboard.
•
Keep both keys pressed even after the vibration alarm.
As soon as the status-LEDs go out the
Vectron POS MobilePro III is switched off.
Summary of Contents for POS MobilePro III
