Vectron POS MobilePro III, Notes On Installation And Operation

Page: 27 / 68

27
EN
3. S t ar t ing
Your Vectron specialist retailer has programmed the
Vectron POS MobilePro III for you. If necessary, he will be glad to
support you during initial start-up and will train you in using your
POS system..
3.1. Setting up the Charging station
3.1.1. Selecting the setup site for the
Charging station
• Set up the Charging station in a well-ventilated room with a
temperature between 0 and 35 °C.
• The Charging station must not be covered during operation.
• Select the setup site so that the Charging station is not
exposed to direct sunlight.
• Place the Charging station on a stable, even surface with
sufficient space.
• Make sure that no liquids can flow over the
Charging station, the power supply unit or the mains cable.
• Route the cables so that they are not subjected to tensile
loading.
• Route the cables so that no one can trip over them.