Riding instructions
We would like to give you the following riding tips:
Avoid improper braking. It can cause serious damage to the brakes and even make you lose control of
the vehicle while riding.
Do not ride under the influence of alcohol or any drugs or medicines that may alter your reaction
time.
Always use proper equipment including helmet, footwear, gloves, etc.
Do not hang objects from the handlebar or other vehicle parts. Use the accessories provided by
VECTOR for transporting packages.
Adjust the position of the rear side mirror to have a clear vision (if it is equipped with it).
Do not carry passengers. The Vector is designed to transport one person.
Never ride the vehicle when being towed.
When on a descent, remember to keep your weight towards the back and as low as possible.
Please respect the environment and traffic regulations and road safety. Pay special attention to
pedestrians, cyclists and animals. By not making noise, you may not be seen, and could cause damage
and/or accidents.
If the warning light flashes, remember to reduce the level of performance demand and assist the
Vector by pedaling.
Remember not to overheat the motor riding too slow/fast on slopes.
Don’t ride the bike with
the battery under 10% to prevent over discharge.
Avoid parking the vehicle in places where the ambient temperature is below -
10°C/
-
4°F.
Heat is also important. Charging your battery at a temperature above 35°C can damage the battery
and shorten its lifespan.
When riding, the electrical components are subjected to a maximum demand that will cause its
temperature to rise. You must take this into account. For this reason and to ensure the proper
functioning of the battery, the operating temperature range for your e-bike is recommended between
-
10°C and 35°C.
Summary of Contents for e-bike
Page 1: ...Vector e bike Manual Version 1...
Page 24: ...Push the axle all the way through the left fork leg Screw the axle cup into the axle...
Page 37: ......
Page 45: ......