Vector has stopped
If this occurs during a ride it is possible that:
1.
The battery is empty. Check the battery level displayed on the dashboard and if so, look for
the charger to charge the battery.
2.
The overheating protection system has been activated on any of the power elements
(battery, motor, controller). Turn the vehicle off and wait for it to cool down. Turn it on again after a
while.
3.
The brake sensor is active anf the brake light shining without touching the brake lever.
Unscrew the fixating bolt on brake sensor and pull the brake sensor out of brake. Touch brake leaver
to make sure the brake sensor will activate during braking.
Summary of Contents for e-bike
Page 1: ...Vector e bike Manual Version 1...
Page 24: ...Push the axle all the way through the left fork leg Screw the axle cup into the axle...
Page 37: ......
Page 45: ......
