Vdwall LVP909 Series, User Manual, Page: 21 / 35

LVP909 control software run in PC to realize the control of LVP909.
Double click to start the software “LVP909 Control Software.exe”, it shows as
below:
LVP909 has built - in network - RS232 convert module. After wired network con-
necting LAN and setting relative network configuration parameters ( refer to user
manual page 102 “7 - 5.Communication setting” ), LVP909 becomes a work station
in the local area network. So another terminal device in the local area network
can remotely control the LVP909 by software. As the picture below, any terminal
( work station ) in the local area network can remotely control the LVP909.
As shown above, there are 4 parts of the software:
1) Communication
2) Control Setting
3) Image Quality and Border Setting
4) Advance Setting
2.
Wired network
Pic 8-1b Wired network
Pic 8-2a PC software Guide interface
Network cable
Network cable
Router
Wi-Fi
Work station 1
Work station 2
LVP909
8-2 LVP909 PC software instruction
LVP909’s communication connection interface as above, first select the connection
way as RS
-
232 or Network
。
1. Communication setting
Pic 8-2b PC software connection interface
LAN 192.168.1.8 7
Connection way
Default IP address Default port
After setting parameters above, click Connect , after success connection, Connect
button will become Disconnect , then we can close the connection menu and enter
other function settings through main interface.
If select Network, input correct parameters in IP address and port. For wired net-
work, need to set the processor according to the network to be connected.
( refer to 7-5.Communication, Page 102 of this manual )
.
If auto connection is needed after PC software starts, please check the Auto .
Click Connect , when device connect successfully, the button will become
Disconnect , if not successfully, please click Communication , to check
whether the communication setting is correct.
As below we will introduce the operation way of each function of the software:
107 108
If select RS-232 , need to choose correct COM port, click Get to check RS232 ports
of the PC.
LVP909 Series User Manual LVP909 Series User Manual