103
104
7-7 Advance setting
7. Advance
7.1 Adc Calibration OK to Apply ?
7.2 Device Reset OK to Apply
7.3 Out4 resolution 1920x1080_50Hz
Note
: Processors finished white balance calibration before leaving factory.
Please use this item carefully.
1. ADC Calibration
In the current available Analog signals, enter “7.1 ADC calibration” and press
OK
to start to calibrate.
Pic 7-7a LCD window
：
Advance setting
“7.1 ADC Calibration” is used to calibrate the white balance of analog signals
to avoid color cast or extreme darkness problem. This function is only available
for V1,V2 and VGA ports. Setting method:
2. Device Reset
Tips
Data will reset
Press <OK> to reset
Press <return> to cancel
The menu is used to reset LVP909 back to current application mode and current
output resolution default state. Setting method
：
Enter 7.2 Device reset
，
press
OK
. LCD will give reset tips and press
OK
to reset and restart the processor before it disappear.
Pic
7-7b LCD window: initialization tips
3
.
Out4 resolution
Out4 output resolution defaults to be consistent with 1.1 Resolution. It also can be
set as 1280x720_60Hz. The setup menu is 7.3 Out4 resolution .
Setting method
：
Enter
7.3 Out4 resolution
and rotate
knob
to select output resolution and then
press
OK
to save parameters.
7
.
Advance
7.1 Adc Calibration OK to Apply
7.2 Device Reset OK to Apply
7.3 Out4 resolution 1280x720_60Hz ?
Note
:
AppM4 need Out4 port to mosaic. It cannot set Out 4 resolution in this mode.
7-8 Dual picture setting ( PIP )
In switcher mode ( AppM1
and dual picture function is turned on( PIP indicator on
，
)
)
press
Setup
to enter setup menu D. PIP . Users can set PIP signal and output image
parameters.
Pic 7-7c LCD window: Out4 resolution
D. PIP AppM1 M3
D.3
Output Image
>>
D.1 Image_1 source
HDMI
V1 V2 VGA
DVI
SDI
D.2 Image_2 source
V1 V2 VGA
DVI
SDI
HDMI
Pic 7-8a LCD window: PIP setting
LVP909 Series User Manual
LVP909
User Manual
Series