Vdwall LVP909 Series, User Manual, Page: 17 / 35

99 100
Auto
Mosaic
Menu
Total screen width and
height
Calculate the mosaic
parameters automatic.
Each port control LED
screen size and position
with respect to the entire
screen.
2.1 LED Total Width
2.2 LED Total Height
2.4 Unit Width
2.5 Unit Height
2.6 Unit H_Start
2.7 Unit V_Start
2.8 Auto Calculation
Description Adjustment items
Manual
Setting
Menu
Intercept DVI input image
position and size.
Output parameters
2.9 In Width
2.10 In Height
2.11 In H_Start
2.12 In V_Start
2.13 Out Width
2.14 Out Height
2.15 Out H_Start
2.16 Out V_Start
The setting method is as follow:
1
.
Press display mode buttons ( M1 , M2 , M3 , M4 ) to select desired
setting mode.
2. Press output port buttons ( Out1 , Out 2 , Out 3 , Out 4 ) to select desired
adjustment output ports.
3
.
Set the total width and height of need mosaic LED screen in turn. And the port
controls LED screen size and the position with respect to the entire LED screen.
Then enter setup menu 2.8 Auto Calculation and press
OK . LVP909 will
calculate the output and input parameters of this port.
4. From item 2.9~2.16, slight adjust the auto parameters according to the output
image display effect.
5. Repeat steps ( 2~4 ) to set other ports parameters.
3. Output image parameters setting of multi-windows mode
Application mode 5 and 6 are multi-windows modes. Set each image output
parameters in output image window. Press Setup to enter user setup menu and
press ↓ to select 2.output image and press rotate button ( OK ) to enter the
following picture 2. output image menu.
2. Output Image ( Image 3 ) AppM5 M3
2.1 Out Width 960
2.2 Out Height 540
2.3 Out H_Start 0
2.4 Out V_Start 540
Pic 7-2C output image parameters setting of multi-windows mode
Setting method :
Setup menu 3. Input Video Signal is used to set processor input signal corresponding
configuration. In switcher, mosaic and multi-windows mode, there are different setting.
7-3 Input video signal setting
Press mode buttons ( M1 , M2 , M3 , M4 ) to select desired setting mode. Then
press image selection button ( IMG1 , IMG2 , IMG3 , IMG4 ) to select desired setting
image. Press ↑ or ↓ to select desired adjustment setting and rotate knob to select
suitable parameters. And press OK button to save parameters.
Pic 7-3a LCD window: Input signal switching mode
3
.
Input Video Signal
3. 1Switch Mode One Key SW.
In switcher and mosaic mode( AppM1~4 ), this menu is used to set signal switching
mode.
1. Input signal switch mode
Setting method:
Enter setup menu 3.1 Switch mode and rotate knob to select One Key SW .
or Pre.+Take SW . Then press OK button to save parameters.
LVP909 Series User Manual LVP909 User Manual Series