3
.
Switch effect selection ( C / F )
Switch effect:
Cut
Switch time:
0sec
1sec
2sec
Cut
Fade
Slip: R->L
Slip
：L->R
Slip: LU->RD
D. PIP
AppM1 M3
D.
3
output image
>>
D.1 Image_1 source
HDMI
V1 V2
VGA
DVI
SDI
D.
2 Image_2 source
V1 V2
VGA
DVI
SDI
HDMI
Switch dual picture display mode
: when dual picture mode is on, press mode
buttons directly
（
M1
、
M2
、
M3
、
M4
）
to fast switch to corresponding display
modes.
This function is only available for non mosaic mode. Specific effects are as follow:
1
.
In AppM1 signal switching state, press
C / F
button, the LCD will display the above
menu
and rotate
knob
to select
Cut
,
Fade
or
Slip
switching effect and switching time.
2
.
In AppM1 PIP display mode and App5 and App6 multi-windows display modes,
press
C / F
to switch
Image overlay fade time
including 0 sec (
CUT
) , 1 sec and 2 sec.
Pic 6-1c LCD window: switch effect selection
Pic 6-2b LCD window: dual picture setting
In AppM1 state, LVP909 can realize two pictures display. The two input signals
can be any selection. And the position, size and overlay order can be preset four modes.
6-2 Dual Picture Display Operation
Image_1 source:
HDMI
Image_1 status 1080p_60Hz
:
Image_2 source: V1
Image_2 status: PAL
Image_1 Posi.&Size: (
0
、
0
、
1920
、
1080
）
Image_2 Posi.&Size:
（
64
、
32
、
640
、
360
）
Display Mode:
M2
App. Mode:
AppM1
Image2->1:
2 S
Enter dual picture display mode:
press
PIP
button and the indicator is on,
lvp909 will enter dual picture display mode. Then press
Setup
button to enter setup
menu to operate PIP(
like the following figure
).
The specific operation methods are as follow:
Pic 6-2a LCD window: dual picture operation
Change image source:
when dual picture mode is on, enter setup menu
D.1
Image_1 source or D.2 Image_2 source and rotate
knob
to select corresponding
input signal and press
OK
to save.
Change image overlay order
switching time
: Press
C / F
to select Image
overlay switching time including 0 sec ( Cut ), 1 sec and 2 sec.
C
hange image overlay order
:
when dual picture mode is on, press
IMG1
or
IMG2
button. And then the selected signal will display on the top.
The AppM2, 3, 4 of LVP909 are mosaic mode. The corresponding output ports
can splice together to drive huge LED screen. In the mosaic application modes,
in addition to signal switching operation, users can call mosaic modes, check
mosaic parameters and do other operation.
6-3 Mosaic function operation
Input: HDMI
In Status: 1080p_60Hz
OUT1 out posi.& size: (0, 0, 1920,1080 )
OUT1 in posi.&size:
(0, 0, 1920,1080 )
Switch mode:
One Key SW.
App. Mode:
AppM4
Pic 6-3a LCD window: mosaic application mode
Set output image:
when dual picture mode is on, enter setup menu D.3 output
image, press ↑ or ↓ to select corresponding setting and rotate
knob
to change
parameters. Press
OK
to save.
89
90
LVP909 Series User Manual
LVP909
User Manual
Series