1.
Call modes
Image_3 Status:
Image_1 Source:
HDMI
Image_1 Status:
1080p_60Hz
Image_2 Source:
V1
Image_2 Status:
PAL
Image_3 Source:
VGA
1080p_60Hz
Image_4 Source:
V1
Image_4 Status:
PAL
App. Mode: AppM5 Image4-3-1-2 2s
2.
Check parameters
In mosaic application mode, press output port buttons
Out1
,
Out2
,
Out3
,
Out4
. Then the LCD will display the current port output position and size.
3.
Switch Out4 output monitor modes
In application mode3, Out4 output current signal or preselect signal monitor which
is decided by the current signal switching way. Enter setup menu 3.1 switch mode
to select signal switching way.
In mosaic application mode, LVP909 can preset 4 groups mosaic parameters.
Press mode buttons
M1
、
M2
、
M3
、
M4
to call corresponding modes directly.
1. Switch image overlay order
Multi-windows display of LVP909 is realized through multi-windows overlay.
The default overlay order is image 4/3/2/1 from top to bottom. The overlay relations
can be switched through image buttons
IMG1
,
IMG2
,
IMG3
,
IMG4
: If you press
corresponding image button
IMG1
, then image 1 is sticky.
One key switch
Pre. +Take switch
Current signal
Preselect signal
Switch mode
Out4 monitor output
setting)
4. Set parameters
In mosaic application mode, press
Setup
to enter item 2.output image setup menu
( the detail setting way please refer to page
67
-mosaic application mode output parameters
2. output image(Out1)
AppM4 M3
The AppM5 and AppM6 are multi-windows modes. They will realize four images
and three images display respectively. Users can preset 4 modes to display multi-
windows position, size and overlay order. The following is the related operation.
6-4 Multi-windows display operation
2.1 LED Total Width 3840
2.2 LED Total Height 2160
2.3 Output Port Out1
2.4 Unit Width 1920
2.5 Unit Height
1080
2.6 Unit H_Start 0
2.7 Unit V_Start 0
2.8 Auto Calculation OK To Apply
Pic 6-3b LCD window: mosaic parameters setting
Pic 6-4a LCD window: multi-windows application mode
3
.
Image source
AppM5 M1
2. Switch multi-windows display modes
3. Switch image input source
Press mode buttons
M1
,
M2
,
M3
,
M4
to switch corresponding display mode.
Press
Setup
to enter setup menu 3. Image Source , Press ↑ or ↓ to select
corresponding image source and rotate
Knob
to select input signals. Press
OK
to save.
Pic 6-4b LCD window: multi-windows setting
91
92
3.1 Image_1 Source
V1 V2 VGA
DVI
SDI
HDMI
3.2
Image_2 Source
V1 V2 VGA
DVI
SDI
HDMI
3.3
Image_3 Source
V1 V2 VGA
DVI
SDI
HDMI
3.4
Image_4 Source
V1
V2
VGA
DVI
SDI
HDMI
LVP909 Series User Manual
LVP909
User Manual
Series