96
Tap the
Subtitle
button to make the corresponding
settings. Tap the
Auto
button to automatically dis-
play subtitles (where available) in the language se-
lected in Audio settings.
Some channels broadcast programmes that offer
foreign language subtitles, e.g. German. If this is
the case for any of the active channels, the available
languages are displayed in the language selection.
Tap
Language
to make your selection.
To stop subtitles being displayed, tap
Off
.
Tap the
System
button to make the
System
settings
.
Tap the
Mobile
button to watch television while
travelling, tap
Stationary
to only watch television
when stopped.
Auto Scan Delay
allows you to state after how
many seconds a new search should be run after the
current channel signal becomes too weak. The
default value is 10 seconds.
Tap on
Next
at the top of the screen if you want to
reset the device to the DVBT receiver's factory
settings.
Tapping the
Reset Reception Data
button will clear
all saved channel and programme data. If you tap
on the
Back
button in the top left of the screen
after clearing the data, the device automatically
starts scanning for channels again and the new data
is saved.
This is recommended if you often use the television
when travelling.
DVB-T television